Manual for Advance 10TM
USB3,4 Connectors
Besides USB1 and USB2 ports on the back panel,the mainboard also has a header on
board which may connect to front panel USB cable to provide additional 2 USB Ports.
Parallel Port, Serial Port Connectors (UART1, UART2)
The parallel port connector can be connected to a parallel device such as a printer. The serial
ports UART1&UART2 connectors can be connected to serial port devices such as serial port
mouses. You can enable/disable them and choose the IRQ or I/O address in “INTEGRATED
PERIPHERALS” from AWARD BIOS SETUP.
Line-in Jack, Microphone-in Jack, Speaker-out Jack and MIDI/
Joystick Connector
The Line-in jack can be connected to devices such as a cassette or minidisc player for
playback or recording. The Microphone-in jack can be connected to a microphone for voice
input. The Speaker-out jack allows you to connect to speakers or headphones for audio
output from the internal amplifier.The MIDI/Joystick connector allows you to connect a game
joystick or a MIDI device.
Installation Instructions
MIDI/Joystick
Speaker out
Line in
Microphone in
optional
USB3,4
GND
GND
CUT
D1+
D1-
+5V
D0+
1
+5V
D0-
CUT
Parallel Port
UART1
UART2