Manual for Advance 10T
Jumper Settings
Jumpers are located on the mainboard, they represent, clear CMOS jumper JCC, enable
BIOS Protection function jumper JAV etc. Pin 1 for all jumpers are located on the side with a
thick white line ( Pin1
→
), refer to the mainboards silkscreen. Jumpers with three
pins will be shown as to represent pin1 & pin2 (1-2)connected and
to represent pin2 & pin3 (2-3)connected.
Overclocking Jumper Setting (JCLK1, JCLK2)
The jumpers JCLK1 and JCLK2 provide users with CPU overclocking feature. If they are set
as Auto, the system will detect the CPU FSB (front side bus) automatically.
For more FSB frequency selection, you can check it in SpeedEasy CPU Setupsection of
BIOS and set the proper CPU FSB speed that you need. You can also adjust the CPU
frequency by running StepEasy(optional).
Whether or not your system can be overclocked depends on your processors capability. We
do not guarantee the overclocking system to be stable.
Warning: Be sure your selection is right. CPU over speed will be dangerous! We
will not be responsible for any damages caused.
Installation Instructions
JCLK1
JCLK2
1
1
3
2
2 3
CPU FSB
1-2:
pin1 & pin2 closed
2-3:
pin2 & pin3 closed
JCLK1
2-3
66MHz
100MHz
133MHz
1-2
1-2
JCLK2
2-3
2-3
1-2
