QDI ADVANCE 10F, Руководство пользователя

Страница: 36 / 61

Manual for Advance 10B/Advance 10F
l Gate A20 Normal The A20 signal is controlled by the keyboard controller
Option or chipset hardware.
Fast Default setting. The A20 signal is controlled by Port 92
or the chipset specific method.
l Security Option System Select whether the password is required every
Setup time the system boots or only when you enter
setup.
l OS Select For Non-OS2 If your operating system is not OS/2, please select
DRAM>64MB this item.
OS2 If system DRAM is more than 64MB and the operating
system is OS/2, please select this item.
l HDD S.M.A.R.T Enabled Enables S.M.A.R.T hard disk support.
Capability Disabled Invalidates this feature.
l Video BIOS Enabled Video BIOS will be copied to RAM. Video Shadow
Shadow will increase the video speed.
Disabled Video shadow is disabled.
l C8000~CBFFF Enabled Optional ROM will be copied to RAM by 16K bytes
Shadow: per unit.
DC000-DFFFF
Shadow: Disabled The shadow function is disabled.
l Delay For HDD 0~3 Sets the pre-delay time for hard disk to be
0~3 (Secs): accessed by the system.
l Show Bootup Disabled Enables the logo when system boots up.
Logo Enabled Logo will not be shown when system boots up.
l Flash Write Enabled Does not allow you to upgrade the BIOS.
Protect Note: Enabling this item can protect the
system BIOS from being attacked by severe
virus such as CIH. Therefore disable this
item item only when wanting to flash BIOS,
afterwards set this item as Enabled (default).
Disabled Disabling this item allows you to upgrade the BIOS.
32
Award BIOS Description