QDI ADVANCE 10F, Руководство пользователя

Страница: 21 / 61

Manual for Advance 10B/Advance 10F
Hard Disk LED Connector (HD LED)
The connector connects to the case’s IDE indicator LED indicating the activity status of IDE
hard disk. The connector has an orientation. If one way doesn’t work, try the other way.
Reset Switch (RESET)
The connector connects to the case’s reset switch. Press the switch once, the system
resets.
Speaker Connector (SPEAKER)
The connector can be connected to the speaker on the case.
Power LED Connector (PWRLED)
The power LED has four status. When the system is in power up status, the LED is on.
When the system is in suspend status, the LED is blink. When the system is in Suspend to
RAM, the LED is off. When the system is in Soft-Off status, the LED is off.The connector has
an orientation.
ACPI LED Connector (ACPI_LED)(Reserved)
The ACPI LED is double-color lights with three pins. Pin1&Pin2 drive different color lights. If
Pin1 drives orange light , Pin2 drives green light, the following status will come out. When
the system is in power up status, the LED is green on. When the system is in suspend
status, the LED is green blink. When the system is in suspend to RAM status, the LED is
orange on. When the system is in soft-off status, the LED is off.
GREEN LED Connector (GREEN_LED)
The GREEN LED has four status. When the system is in three status (including power up,
suspend, soft-off), the LED is off. When the system is in suspend to RAM status, the LED
is on.
Hardware Green Connector (SLEEP)
Push once the switch connected to this header, the system enters suspend mode.
chapter 2
17
HDLED
SPEAKER
ACPI_LED
RESET
Power
SLEEP
GREEN_LED KEY_L
POWER_LED
HDDLED
SPKDA
T
A
NC GND
VCC
HDDLED
SPEAKER
GND
RESET
RESET
EMPTY LED
LED - LED -
Green_LED
KEYLOCK
GND
KEY_L
LED1 - LED2 - LED+(VCC) POWER
GND
EMPTY
LED + LED - LED - SLEEP
GND
EMPTY
ACPI
LED
Power
SLEEP POWER
LED