background image

CHANNEL ANNUNCIATION

When changing the channel using the Channel selector, an audio voice will 
announce the selected channel number after you stop changing the channel 
(Channel Annunciation can be activated or deactivated by your dealer)

CTCSS/DCS

Your dealer may have programmed CTCSS or DCS signalling on your 
transceiver channels. A CTCSS/DCS tone or CTCSS/DCS code is a sub-
audible tone/code, which allows you to ignore (not hear) calls from other 
parties who are using the same channel.
When a channel is set up with a CTCSS/DCS tone or CTCSS/DCS code, 
squelch will only open when a call containing a matching tone or code is 
received. Likewise, signals that you transmit will only be heard by parties 
whose CTCSS/DCS signalling matches your transceiver.
If a call containing a different tone or code is made on the same channel you 
are using, squelch will not open and you will not hear the call. This allows you 
to ignore (not hear) these calls.
Although it may seem like you have your own private channel while using 
CTCSS/DCS, other parties can still hear your calls if they set up their 
transceiver with the same tone or code.

Silverstone Crescent
Kyalami Business Park
P.O. Box 76117, 
Wendywood, 2144
Tel. (011) 996-4400  
Fax. (011) 466-1878
Web:  http:\\www.qd-group.co.za

Содержание QD16-C

















Отзывы: