QD QD16-C, Руководство пользователя

Страница: 12 / 16

 Scanning starts from the current channel and ascends through the
channel numbers.
 The LED indicator flashes green.
 When a signal is received on a channel and signalling matches, the
LED indicator lights green.
To end Scan, press the Scan or Scan + Temporary Delete key again.
PRIORITY SCAN
If enabled, a priority channel is set up one of two ways:
 Your dealer may set up a fixed priority channel on your transceiver.
 You can select your own priority channel, prior to scanning, using the
Channel selector.
 Your dealer programs the delay time between signal drop-out and scan
resumption.
TEMPORARY DELETE
If a key is programmed with the Temporary Delete or Scan + Temporary
Delete function, you can temporarily remove specific channels from the
scanning sequence during Scan. When Scan stops at a channel, you can
remove that channel from the scanning sequence by pressing and holding the
key programmed as
Temporary Delete or Scan + Temporary Delet e for 1
second.
 You cannot delete the Priority channel, if one has been set up.
 You cannot delete a channel if there will be less than 2 channels
available for scanning remaining.
 To add the channel back into the Scan list, simply exit Scan mode or
switch the transceiver OFF and then ON again.
REVERT CHANNEL
During Scan, pressing the PTT switch to transmit will cause the transceiver to
select the revert channel. Your dealer can program the revert channel using
one of the following methods:
 Selected : The last channel selected is assigned as the new revert
channel.
 Se Talkback: If the channel has been changed during Scan,
the newly selected channel is assigned as the new revert channel.
However, the transceiver also transmits on the channel where Scan is
currently paused.
 Priority : If your dealer has programmed a Priority channel, it is the
revert channel.
 Pr Talkback: If your dealer has programmed a Priority channel,
it is the revert channel. However, the transceiver also transmits on the
channel where Scan is currently paused.