ADVANCED OPERATIONS
The following functions are programmable by your dealer as described on
page 6.
KEY LOCK
Press and hold the key programmed as Key Lock for 1 second to lock/unlock
the transceiver keys. The following keys/functions can still be used when Key
Lock is active: Key Lock, Monitor, Monitor Momentary, PTT, Squelch Off,
Squelch Off Momentary and Volume.
If the key is programmed “with backup” when the transceiver power is turned
OFF and then ON again, the keys remain locked.
Otherwise, when the transceiver power is turned OFF and then ON again, the
Key Lock function will be cancelled.
MONITOR / SQUELCH OFF
You can use the key programmed as Monitor or Squelch Off to listen to weak
signals that you cannot hear during normal operation, to deactivate channel
signalling and to adjust the volume when no signals are present on your
selected channel.
Squelch Off:
Momentarily press to hear background noise. Press the
key again to return to normal operation.
Squelch Off Momentary:
Press and hold to hear background noise.
Release the key to return to normal operation.
Monitor:
Momentarily press to deactivate CTCSS, DCS signal. Press
the key again to return to normal operation.
Monitor Momentary:
Press and hold to deactivate CTCSS, DCS
signal. Release the key to return to normal operation.
SCAN
Scan is useful for monitoring signals on the transceiver channels. When
scanning, the transceiver checks for a signal on each channel and only stops
if a signal is present.
The transceiver will remain on a busy channel until the signal is no longer
present. Your dealer programs the delay time between signal drop-out and
Scan resumption. If a signal is received during the delay time, the transceiver
will remain on the same channel.
!
NOTE
You can only use Scan if your dealer has programmed at least 2 channels
and they are not locked out of Scan
To start scanning, momentarily press the key programmed as either
Scan
or
Scan + Temporary Delete
All manuals and user guides at all-guides.com
all-guides.com
