manualshive.com logo in svg

QCT QuantaGrid Series, Руководство по обслуживанию

Поделиться
Скачать
QCT QuantaGrid Series Скачать руководство пользователя страница 8

 R

EGULATORY

 

AND

 C

OMPLIANCE

 I

NFORMATION

R

EVISION

 H

ISTORY

 

VII

Revision History

Refer to the table below for the updates made to this technical guide.

Copyright

Copyright © 2015 Quanta Computer Inc. This publication, including all photo-

graphs, illustrations and software, is protected under international copyright laws, 

with all rights reserved. Neither this guide, nor any of the material contained herein, 

may be reproduced without the express written consent of the manufacturer. All 

trademarks and logos are copyrights of their respective owners.

Version 1.0 /  May 12, 2015

Disclaimer

The information in this document is subject to change without notice. The manu-

facturer makes no representations or warranties with respect to the contents 

hereof and specifically disclaims any implied warranties of merchantability or fit-

ness for any particular purpose. Furthermore, the manufacturer reserves the right 

to revise this publication and to make changes from time to time in the content 

hereof without obligation of the manufacturer to notify any person of such revision 

or changes.

For the latest information and updates please see 

www.QuantaQCT.com

All the illustrations in this guide are for reference only and are subject to change 

without prior notice.

D

ATE

C

HAPTER

U

PDATES

Содержание QuantaGrid Series








































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды