QCT IronRAN-RU4 MO GenA, Руководство пользователя

Страница: 25 / 41

I
NSTALLING
H
ARDWARE
I
NSTALLING THE
RRU
ON A
W
ALL
2-4
Fixing the device to a wall is a two step process. First the provided clamp (A) must be
installed on the wall location. Then, the device is installed on the clamp.
Requirements:

Install the bracket on the device. See Installing Bracket A on Device on page 2-3.
1. Position the clamp (A) over the wall location, making sure the arrow marking faces
up, and mark the screw hole positions to serve as markers.
2. Remove the clamp from the wall and drill holes on the marked locations.
3. Insert wall sinks (not provided) in the drilled holes.
4. Re-position the clamp on the wall and align the screw holes on the clamp over the
drilled holes on the wall. Ensure the directional marker (arrow) is pointing upwards
designating a correct bracket alignment.
5. Secure the clamp with the M10 B screws.
Figure 2-2. Installing a Clamp (A) on a Wall
6. Insert the M8 B guide screws in the mounting holes on the clamp.
Figure 2-3. Installing Mounting Screws on a Clamp