INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO BLK ML-G10/t
INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO BLK ML-G10/t
14
15
3 Installation
3.2 Preparation of installation
Danger! Risk of fatal injury due to electric shock!
Block off the installation zone.
Keep children and unauthorized individuals away
from the solar power system.
Danger! Risk of fatal injury due to electric shock!
Ensure that modules and tools are not subject to
moisture or rain at any time during installation.
Warning! Risk of injury due to falling modules!
Secure modules during installation.
Do not install modules in windy or wet weather.
Danger! Risk of fatal injury due to electric shock!
Only use dry, insulated tools.
Do not carry out the installation alone.
■
Only install undamaged modules and components.
Do not modify the module
(e.g. do not drill any additional holes).
3 Installation
3.3 Module installation
Option 1:
Fasten the module with 4 clamps in the specified
clamping range, see Fig. 2, p. 7.
Tighten clamps according to manufacturer’s instruc-
tions.
Maintain an interval of at least 0.39 in (10 mm) be-
tween two modules along the short side and 0.20 in
(5 mm) along the long side.
0.39 in (10mm)
0.20 in
(5 mm)
Note! Module damage may occur!
Do not subject modules to mechanical tension. Max.
torsion 0.39 in / ft (10 mm / m).
Option 2:
Install the module at the 4 mounting points,
see Fig. 2, p. 7.
Tighten screws according to manufacturer’s instruc-
tions.
Option 3:
Install the module using mounting profiles,
see Fig. 2, p. 7.