Optimizer4D Technical Specifications
12 / 27
Sensor (MCX)
Sensors
Sensors
consists of a piezo-ceramic
element which detects high frequency
impulses, also known as acoustic emissi-
on or structure borne noise. The piezo-ce-
ramic element is placed into a cylindrical
housing of heat-treatable steel.
Do not expose the sensors to
temperatu-
res
above 170° Celsius.
Mount
the sensors with a wrench size
SW 19, use a force of 6 newtonmeters.
You can also use a
magnetic adapter
, but
the signal transmission is better if you
use screws. Attach the sensor as close
to the tool or work piece as possible to
ensure signal strength.
Following installation and commissio-
ning, Optimizer4D executes a
self-test
,
in order to determine if the sensors are
correctly installed, among other things.
Sensor cable with MCX connectors
Sensor (M5, previous version) with creamic
adapter (no electrical noises)
Sensor (M5, previous version) with
magnetic adapter
Sensor (M5, previous version) with cable
Pos. Name
Type
Order-Nr.
Weight (kg)
1
Sensor with thread (M5)
Standard SW19
QWT-MCX
<0,065
2
Ceramic adapter (without sensor)
Standard SW19
O-WT ADAPTER-003
3
Magnetic adapter (without sensor)
Standard SW22
O-WT ADAPTER-002
4
Sensor cable,
straight connectors
5,0 m
O-CC WTS 0500
0,076
5
3,5 m
O-CC WTS 0350
0,054
6
2,5 m
O-CC WTS 250
0,038
7
Sensor cable,
angled connectors
5,0 m
O-CC WTA 0500
0,076
8
3,5 m
O-CC WTA 0350
0,054
9
2,5 m
O-CC WTA 0250
0,038
1
2
3
4-6
7-9
The standard cable will be delivered with an
angled connector.
