QA OCEANAIRE PWC60, Инструкция по инженерии, установке и обслуживанию

Страница: 14 / 32

12
ACCESSORIES
Hose Kit
Hose kits are available in lengths of 10, 25, and 40 feet. Each hose kit allows for conven-
ient installation of the PWC, while allowing for portability within the allowable space.
NOTE
—
When using these hoses in applications with water
pressures exceeding 50 PSIG, a water pressure reducing valve
must be installed in the water supply line prior to the hose kit;
otherwise warranty on the hose kits will be void.
All hose kits have FEMALE flare connectors to match the MALE flare fittings on the units
(see chart below). The WATER IN connector consists of a 3/4” hose barb. WATER OUT
and DRAIN (condensate) have no fittings, and can be fed to a sink or permanent drain.
When using a hose kit, avoid sharp corners, hot water pipes and kinking to assure proper
water flow of the supply, return, and drain lines.
Hose
Kit
Length
Flare Conn
IN-OUT-
DRAIN
PWC12 PWC18 PWC24 PWC36 PWC60
HK-1
10 ft 3/8 3/8 3/8
  
HK-2
25 ft 3/8 3/8 3/8
  
HK-5
40 ft 3/8 3/8 3/8
  
HK-3
10 ft 5/8 5/8 3/8
 
HK-4
25 ft 5/8 5/8 3/8
 
HK-6
40 ft 5/8 5/8 3/8
 
Included with the hose kit is a sink/faucet adapter