8
Introduction
NETWORK GATEWAY (QG-N3)
The RCAS system can also be networked by ethernet using a QG-N3 Network Gateway to remotely control QT-
5100, AD10, and legacy analog transmitters utilizing MicControl software running from a computer on the same
network. Multiple QG-N3 gateways can be added to an ethernet network to manage large venue installations.
The QG-N3 is powered through a power over ethernet (PoE) switch or by a micro USB power supply.
MICCONTROL
MicControl is a Windows based software program used to conveniently setup and control QT-5100 transmitters
through a friendly Graphical User Interface (GUI). This is particularly useful when dealing with installations of
multiple transmitters. MicControl can comfortably control up to 100 transmitters and can be connected to
multiple QG-N3 Network Gateways via ethernet and QG-H2 MicCommanders via USB to cover large venues.
MICROPHONE
QT-
5100 uses a 1-pin Lemo connector fo
r the PlayerMic, RefMic, RefMicHD, BeltMic and Incognito and a 6-pin
waterproof Lemo connector for the AquaMic. Microphone selection should be made with care as microphones
with poor shielding are susceptible to RF noise caused by the transmission of the audio and 2.4 GHz control signal.