5
Controls and connections
To turn on, momentarily press “pushbutton” (3). The green LED (2) will
flash the previously used “BANK” ( 3 flashes = BANK 3). The
transmitter is now powered on and the rotary switch (1) will indicate
the channel. If the red LED (2) is out the transmitter is in operation.
Rotating the channel selector (1) will change the channel. To change
the BANK, set the rotary switch (1) To the appropriate BANK number
and press the pushbutton (3) until the green LED (2) flashes the new
BANK. Then set the rotary switch (1) to the desired cahnnel.
To power OFF the transmitter, momentarily press the pushbutton (3).
The red LED (2) will light and fade out indicating the transmitter has
turned OFF.
(
It is normal on power up for the transmitter to take from 1-5 seconds
to lock on to frequency, this will be indicated by the red LED (2).
