Installation and Operation Manual
Q
F
ire – Fire Brigade Switch
6
MAINTENANCE/SERVICE
The operator is responsible for complying with and commissioning the prescribed maintenance and
service intervals.
6.1
MAINTENANCE INTERVAL
Service and maintenance work may only be
carried out by a specialist company.
Regular visual inspections of the components by
the customer are recommended, especially in
case of abnormalities, see chapter
TROUBLESHOOTING AND REMEDY, page 24.
The operation of the product in intended use does
not require any special supervision. The Q
F
ire sys-
tem does not contain any component inside the
housings which need to be serviced or repaired.
In case of a malfunction, the system must be
switched off and put out of operation by a qualified
electrician. The installer company must be notified.
Interval
Service check
yearly
Functional test
6.1.1 FUNCTIONAL TEST
A complete functional test must be carried out and
documented annually. At this the Q
F
ire system is
switched off and all strings from the distance bet-
ween the Q
F
ire switch box(es) and inverter(s) must
be voltage-free tested and confirmed. See chapter
5 START-UP, page 22.
The functional test must be carried out by a
qualified electrician.
If you have any questions, please contact our
Technical Support by having your serial number
ready, see chapter 6.3 TECHNICAL SUPPORT,
page 23.
6.2
DOCUMENTS
Further documentation is available from our
website: www.q3-energie.de
6.3
TECHNICAL SUPPORT
In a service case please contact us:
Q3 Energie GmbH & Co. KG
phone: +49 (0)8341/9080 334
email: [email protected]
Under www.q3-energie.de you will also find the di-
rect contact to your personal advisor for any kind of
questions.
Q3 Energie GmbH & Co. KG
Phone
+49 (0)8341/9080 334
IA-BA_QFire _E_AS002_V1.0
Moosmangstr. 8
Status
March 15, 2024
Page
23 | 28
87600 Kaufbeuren
Our general terms of business are to be applied.
Germany
Web
www.q3-energie.de
Errors and changes reserved.
eh
alten.
