Wireless USB A/V Adapter Set User Guide
www.q-waves.com
Page 11
3.1 Connect the PC Adapter to the PC
Connect the Wireless USB PC Adapter to a high speed PC USB port. The system will
automatically detect and install the drivers for the connected PC Adapter
[Vista]
[XP]
System Tray icon turns red
to indicate that the PC Adapter (Host) is ready to
connect to any paired device in range
[Vista]
[XP]
3.2 Connect the A/V Adapter
1.
Attach the A/V Adapter to the remote display device (TV/Projector/Monitor), and ensure
the PC (with PC Adapter attached) is within 3 meter distance from the A/V Adapter for
the initial connection. Ensure the two adapters have clear line-of-sight. Connect the
provided power supply to the A/V Base power receptacle.
Note
:
The PC Adapter and Device Adapter in this set are already paired and do not require
performing a pairing procedure. If you should need to perform pairing manually for
any reason (e.g. connecting to a new host PC Adapter, or adding a Device Adapter
that was not purchased in a set), please refer to Appendix B: Pairing Procedure
2.
Wait for the System Tray icon to turn green
, indicating that a wireless connection
with the A/V Adapter has been established. The Display icon
is also displayed as
soon as a connection is established and the Display drivers are active.
Note
:
If you do not see the icon changing to green, or do not see the Display icon, please
see Appendix A: Troubleshooting Help for suggestions.
3.2.1 Connecting Audio
The following options can be used to connect an Audio Output Device to the A/V Adapter:
