INSTALLATION
LED POWER SUPPLY - QTM-eLED+DALI-DT6
© 2021 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | [email protected] | www.q-tran.com
Specification subject to change. Rev-11-15-22
This product must be installed in accordance with the applicable
installation code by a person familiar with the construction and
operation of the product and the hazards involved.
CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D'INSTALLATION
PERTINENT, PAR UNE PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET
SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS.
LOW VOLTAGE
LIGHTING SYSTEM
Q-TRAN, INC.
MILFORD, CT U.S.A.
(203) 367-8777
WWW.Q-TRAN.COM
●
Type Ic Recessed, Inherently Protected
Type IC ENCASTRE, PROTECTION INHÉRENTE
●
For Supply Connections Use Wire Rated for At Least 60C.
Pour les connexions d'alimentation, utilisez des fils
calibrés pour au moins 60C.
●
Suitable For Damp Locations
CONVIENT AUX EMPLACEMENTS HUMIDES
●
Class 2
Classe 2
CLASS:
3425 - 95
3402 - 95
QTM-eLED-100+DALI
QTM-eLED-200+DALI
QTM-eLED-300+DALI
0.95 / 0.40
1.90 / 0.80
2.85 / 1.20
50/60
50/60
50/60
24
24
24
100
200
300
120 / 277
120 / 277
120 / 277
Model
Input Voltage
(V)
Frequency Nominal Output
Voltage (VDC)
Nominal Output
Wattage (W)
Input Current
(A)
120V - 277V
INPUT VOLTAGE
OUTPUT VOLTAGE
24V
CONTROL TYPE
DT8
DT6
6.00"
3.
15
"
QTM-eLED+DALI
QTM-eLED+DALI
C/US
•
Suitable for indoor use
•
This power supply must be installed according to the National Electric Code and local codes and ordinances and in accordance with
applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
•
Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
•
This power supply is to be installed in a location where it is not likely to be contacted by non-electricians.
•
To avoid a hazard to children, account for all parts and destroy all packaging materials.
CSA Requirements
