q-Tech QSW-9010, Руководство по настройке CLI

Страница: 67 / 101

User Manual
6. QoS service configuration 67
www.qtech.ru
When the PON port is a hierarchical scheduling mode, before scheduling to the ONU downlink queue,
configurable queue bandwidth is in ONU (Note: PON is simple
scheduling mode, this property is not
valid, and can not be modified), for example:
OLT (config) # interface gpon-onu1 / 1: 1
OLT (config-gpon-onu1 / 1: 1) # qos-queue-traffic 1
Restore the default queue scheduling policy.
OLT (config) # interface xe1 / 1
OLT (config-xe1 / 1) # qos-queue-traffic default
OLT (config) # interface gpon-olt 1/1
OLT (config-gpon-olt1 / 1) # qos-queue-traffic default
Note:
PON port is hierarchical scheduling mode, the property is not valid and can not be modified.
OLT (config) # interface gpon-onu1 / 1: 1
OLT (config-gpon-onu1 / 1: 1) # qos-queue-traffic default
Note:
PON port is simple scheduling mode, the property is not valid and can not be modified.
Query the queue scheduling policy that message use at the port, this command is used to view the
effective qos-queue-traffic profile at uplink port, PON port, ONU, for example:
OLT (config) # show cos-queue-map interface xe1 / 1
qos-queue-traffic default
OLT (config) # show cos-queue-map interface gpon-olt 1/1
qos-queue-traffic default
View ONU queue speed limit:
OLT (config-gpon-onu1 / 1: 1) # show qos-queue-traffic interface
gpon-onu1 / 1: 1
qos-queue-traffic default
6.3.4. QoS-ONU-Bandwidth
The configuration can only be configured and effective on the ONU when the PON port is a
hierarchical scheduling mode.
OLT (config-gpon-onu1 / 1: 1) # qos-onu-bandwidth min 100 max 1000
Note:
The
maximum bandwidth configuration value of the ONU must be no less than its minimum
configuration. If the maximum or minimum configuration is 0, there will be no rate limitation. By default
here is no rate limitation on ONU downlink.