RECOMMENDED CONNECTIONS
________________________________________________________________________________________
Attention: INPUT 2 (SCART) equals INPUT 2 AUX (Cinch) and TV OUT (SCART) equals TV OUT AUX
(Cinch). You can keep devices connected to every junction all the time but you should switch on only
one at one time.
Istallation:
•
Plug in the AV-Control with the help of the adapter.
•
Connect all devices you want to use as signal sources like DVD-player, video-recorder (VCR)
or satellitereceiver or decoder respectively to the junctions INPUT 1, INPUT 2 and INPUT 3
(SCART).
•
You can use the junction INPUT 2 AUX (Cinch) for a videocamera for example.
•
Connect your TV to the junction TV OUT (SCART).
•
Connect your HiFi-system to the junction TV OUT AUX (Cinch).
•
Use the junction VCR OUT (SCART) to connect a videorecor (VCR) you want to do recording
with.
Automatic Switching:
•
The Audio-Video-Control itself must be switched on.
•
For all at SCART-junctions connected devices it is essential: If you switch on a source device
(INPUT 1, 2 or 3) and the TV (TV OUT) or the videorecorder (VCR OUT) respectively, then
the AV-Control send the correct signal from the sending to the receiving device.
•
Is the receiver the TV then the correct image size ( 4:3 or 16:9)will be also adjusted.
•
Is receiver the HiFi-system, you can listen to the sound of every source-device in stereo.
•
The LEDs on the frontside of the AV-Control shows which source-device is active right now.
•
If you switch every source-device off the AV-Control will change into the Standby mode and
the TV will show your usual broadcasting channel.
