MAIN MENU SETUP GUIDE
QT428 User Manual
19 |
P a g e
4.1.2 Time & Date
Step 1:
Enter into system configuration
basic configuration
time & date; refer to Fig 4-4:
Fig 4-4 Basic Configuration-Time & Date
Step 2:
Set the date format, time format, time zone in this interface; Checkmark “sync time with NTP server” to
refresh NTP server date; user also can adjust system date manually
Step 3:
Click “default” button to restore default settings; click “apply” button to save the settings; click “exit” button to
exit current interface.
4.1.3 DST
Step1:
Enter into system configuration
basic configuration
DST; refer to Fig 4-5:
Fig 4-5 Basic Configuration-DST
Step 2:
In this interface, you can enable daylight saving time, time offset, mode, start & end month/week/date, etc.
Step 3:
Click “default” button to restore default settings; click “apply” button to save the settings; click “exit” button to
exit current interface.
