Q-See QSLO2712, Руководство пользователя

Страница: 58 / 87

58
English
P/T Function Setting
6
、 Move cursor up and down to choose the
current number as the No. required,press
【 OPEN 】 key (open the iris order) to
confirm entering into the former NO. To
move it right and left to choose parameter
needed to change; Use P/T up and
down-ward order to change its parameter,
after that, press
【 OPEN 】 key(open the iris
order) to confirm saving the setting.
7 、 Turn Page No. up and down to choose other
serial number and repeat step 6 to choose
another No. and change its parameter. (as
shown FIG 8)
8 、 After programming all the information, press
【 CLOSE 】 key ( close the iris order ), all
the settings this time will be saved and
then exit the current “Patrol Setting Status ”
Attention
：
a 、 Each Patrol can contain 32 presets.
After programming, pres 【 OPEN 】
key (open the iris order) directly, all
the settings won’t be saved, that is to
say the users must obey step8 strictly,
or all the settings won’t be saved by
the system.
b 、 In Patrol, the system will stop to
return the present patrol route if
some preset No. is 000.
First row second third fourth row
choose
number
from
top
to
bottom
change value from left to right
（ FIG5 ）
™ Remarks
：
It contains 4 lines. The first
line 【ID】 : number1-32.The
second line 【 Preset 】 : preset
No.( No1-56 available ）， The
third line 【 Speed 】 : preset
speed （ 50-128rank
selectable ）， The fourth line
【 Stop 】 : preset parking time
（ 3 － 240S selectable ） .
（ FIG6 ）
(FIG8)
ID Preset Speed Stop
﹡
1 000 120 015
2 000 120 015
3 000 120 015
4 000 120 015
5 000 120 015
6 000 120 015
7 000 120 015
8 000 120 015
ID Preset Speed Stop
↓
25 060 128 010
26 000 050 030
27 000 120 240
28 000 100 015
29 000 120 015
30 030 110 015
31 000 120 015
32 000 120 015
ID Preset Speed Stop
↓
1 000 120 015
2 000 120 015
3 000 120 015
4 000 120 015
5 000 120 015
6 000 120 015
7 000 120 015
8 000 120 015