Problem
My Q-Redew will not turn on
The vapor flow is inconsistent
Water leaks from the vapor outlets
Water Leaks from reservoir
between uses
Possible Solutions
1. Make sure appliance is plugged in.
2. Make sure you are fully depressing trigger.
1. Make sure the reservoir contains water.
2. Hold unit away from body and eyes and continuously depress
trigger to release air.
3. Make sure the reservoir is firmly inserted into the Q-Redew unit.
1. Condensation might occasionally build within the appliance. As a
result, water may occasionally drip out of the vapor outlets between
product uses.
1. Make sure the Rubber Inlet Cover is firmly engaged.
2. Make sure reservoir is firmly inserted into Q-Redew unit.
3. Empty reservoir water between uses if leakage persists.
Storage:
When not in use, unplug and store your Q-Redew unit in a cool, dry location. Do not wrap
cord around the Q-Redew unit. If the cord becomes twisted due to use, periodically straighten the cord.
Store the appliance in a location where it cannot be used unsupervised by children.
Water may remain
in the reservoir while it is not in use. To avoid any chance of occasional water leakage, you may want
to drain the reservoir between uses.
Maintenance:
This appliance requires minimal maintenance to ensure best performance. If necesary,
clean the exterior with a soft cloth and mild soap or surface cleaning solution.
Repair:
Do not try to repair appliance. The appliance has no user-serviceable parts. Incorrect
reassembly or repair could cause risk of fire, electric shock, or injury to persons when the appliance is
used. Refer to the Troubleshooting Suggestions and the Q-Redew Warranty Policy page of this User
Guide for instructions if you feel your appliance is not working correctly.
TROUBLESHOOTING SUGGESTIONS
Page 7
MAINTENANCE INSTRUCTIONS
Hairstyling Vapor Wand
TM
TM
