OPERATING INSTRUCTIONS
Prior to using this appliance, you should first become familiar with its components and features:
Top View:
Bottom View:
Reservoir
(removed)
Trigger
Indicator Light
Prongs
Vapor Outlet Holes
(located at base
of prongs)
Page 4
Hairstyling Vapor Wand
TM
TM
The Q-Redew appliance is to be used solely for the styling of hair, and is intended to be used on dry (not
wet) hair. The appliance should be used only in accordance with the following Operating Instructions:
Step 1: Fill the reservoir
WARNING
:
Never place the Q-Redew unit - with the exception of the removable reservoir - near
water. See Important Safety Instructions for additional warnings regarding electrocution risk.
1. Make sure the Q-Redew appliance is unplugged from the electrical outlet.
2.
Remove reservoir from the Q-Redew appliance with finger.
3. Flip the reservoir. Open rubber inlet cover.
4.
Fill the reservoir with water. Consistency of the Q-Redew vapor emission will be best if the reservoir
water level is maintained above the Minimum Fill Line. Use only water in the reservoir. Any additives
placed in the reservoir might damage your Q-Redew.
5.
Replace rubber inlet cover.
6. Replace reservoir into unit by lining up reservoir into slot, and click into place.
Product
Information
Panel
