Pyxis ST-735 Скачать руководство пользователя страница 3

 

 

 

1.

 

      Introduction 

 

The Pyxis ST-735 inline turbidity sensor can be inserted to the compression fitting port of Pyxis custom-
made ST-001 Tee

 

assembly.  The companion tee has two ¾ inch female NPT ports and can be installed to 

an existing ¾ inch sample water line.  The ST-735 can be also submersed into a vessel with using the 
Pyxis MA-102S submersion adapter. 

 

The ST-735 measures light scattering for the 0 

 100 NTU range using a white LED as the incident light 

source, the 100 

 1000 NTU range using a 950 nm LED light source, and the 950 nm absorbance for the 

1000 

 10,000 NTU range.  The ST-735 turbidity sensor automatically selects the measurement method 

needed for the sample according to the sample turbidity range detected when inserted inline. 

 

The ST-735 probe can be easily removed from the system without the need of any tools for being 
cleaned.  The Pyxis ST-735 probe has a short fluidic channel and is be easily cleaned.  The fluidic and 
optical arrangement of the ST-735 probe are designed to overcome shortcomings associated with other 
turbidity meters. 

 

The 4-20mA current output of the ST-735 probe is internally isolated.  It can be connected to any 
controller that accepts an isolated or non-isolated 4-20mA input.  

 

The Pyxis ST-735 probe uses long life LEDs as light source and will not require replacement in expected 
life unlike conventional turbidity probes.  This greatly enhances the robustness of the ST-735 probe.  It 
can be operated under a wide range of ambient conditions without the need for humidity and 
temperature regulation.  The performance of the ST-735 probe can be stable and consistent for a very 
long period time.   

2.

 

      Unpackaging the Instrument

  

Remove the instrument and accessories from the shipping container and inspect each item for any 
damage that may have occurred during shipping.  Verify that all accessory items are included.  If any 
item is missing or damaged, please contact Pyxis Lab Customer Service at 

[email protected]

 

2.1.

 

      

Standard Accessories Included 

 

ST-001 Tee Set

 

(tee, O-ring, and nut) 

 

Standard cable set with water proof connectors 

 

Instrument Manual, also available from 

www.pyxis-lab.com 

 

Содержание ST-735





















Отзывы: