13
6.5.
Connecting to Device
When connected via USB-Bluetooth, in the Device List a picture of the probe with the serial
number will appear (If no device is found, remove the USB/Bluetooth dongle and reconnect). If
device shows in the Device List, then the probe is connected. Once connected to the
probe, the default main screen is the Information screen. On the main screen you can set the
information description for Device Name and Product Name, then click
Set
to save.
6.6.
Diagnosis Screen
After the device has been calibrated and installation has been completed. To check
diagnosis, click on
Diagnosis
. When in the Diagnosis screen you can view the Diagnosis
Condition of the probe.