Python 872, Руководство пользователя

Страница: 79 / 91

© 2011 Directed Electronics. All rights Reserved. 2
QRN5202 2011-03
Programming System Features
The System Features Learn Routine dictates how the unit operates. It is possible to
access and change most of the feature settings using the Control button.
1. Open a door.
2. Turn the ignition on, then off.
3. Select a Menu. Press and hold the Control button. The number of siren chirps
indicates the menu number. 1 chirp indicates menu 1, 2 chirps - menu 2 and
3 chirps for menu 3.
4. When the desired menu chirps are heard, release the Control button.
5. Select a Feature. Press and release the Control button the number of times
corresponding to the feature you wish to change. Then press and hold one
more time to select the features.
6. Program the Feature. While holding the Control button, you can program the
feature using the remote control.
For features with only two options;
AUX
= option 1 while
AUX
= option 2.
For features with more than two options;
AUX
selects the options in ascending order,
while
AUX
selects them in descending order.
Note:
Pressing
AUX button resets the feature to the factory default.
Once a feature is programmed:
• Other features can be programmed within the same menu
• Another menu can be selected
• The learn routine can be exited if programming is complete
To access another feature in the same menu:
1. Press and release the Control button the number of times necessary to advance
from the feature you just programmed to the next one you want to program.
2. Then press the Control button once more and hold it.
To select another menu:
1. Press and hold the Control button.
2. After 3 seconds, the unit advances to the next menu and the siren chirps, indi-
cating which menu has been accessed.
The learn routine exits if any of the following occurs:
• The open door is closed
• The ignition is turned On
• There is no activity for 30 seconds
• The Control button is pressed too many times
Bitwriter - Only Options
If programming with the Bitwriter®, the learn routine can be locked or un-
locked. If the learn routine has previously been locked, it must be unlocked
with Bitwriter® - this cannot be done manually with the Control button.
The Bitwriter® gives you access to a wider range of system options. These
features and the adjustments that may be programmed are described in the table
below. Default settings are in bold type.
Menu
Item
Feature Default Opt. 2 Opt. 3 Opt.4 Opt. 5+
1 Zone 4 Sensor Type None Shock/
Omni Field
Distur-
bance Tilt Sen-
sor Glass Break (5)/
Ultrasonic (6)
2 Siren Duration 30 sec. Options: 1 to 180 sec.
3 Aux/Trunk Icon Type Trunk Window Sunroof Audio Lights/Left dr/Right
dr/Rear Hatch
4 Aux 1 Timed Output 30 sec. Options: 1 to 90 sec.
5 Aux 1 Icon Type Pulsed Trunk Window Sunroof Audio/Lights/Left dr/
Right dr/Rear Hatch/
Timed/Latched
6 Aux 2 Timed Output 30 sec. Options: 1 to 90 sec.
7 Aux 2 Icon Type Pulsed Trunk Window Sunroof Audio/Lights/Left dr/
Right dr/Rear Hatch/
Timed/Latched
8 Aux 3 Timed Output 30 sec. Options: 1 to 90 sec.
9 Aux 3 Icon Type Pulsed Trunk Window Sunroof Audio/Lights/Left dr/
Right dr/Rear Hatch/
Timed/Latched
10 Aux 4 Timed Output 30 sec. Options: 1 to 90 sec.
11 Diesel Start Delay
Timer 15 sec. Options: 1 to 90 sec.
12 Timer Mode Runtime 12 min. Options: 1 to 16 min.
13 Timer Mode Starts 6 starts Options: 1/2/3/4 to 24 (Starts) in increments of 2
14 Timer mode intervals
3 hr.
Options: 1/2/3/4 to 24 in 2 hour increments
15 Smart start low temp
0° (F)
Options: OFF, -20° to 70° in 10° increments
16 Smart start high temp
100° (F)
Options: OFF, 40° to 130° in 10° increments
17 Smart start low bat-
tery (volts) 10.5V Options: OFF, 9V to 12.5V in 0.5V increments
18 Sensor 1 Level 7 Options: 0 to 15 in increments of 1
19
Starter Release
Fine Tune
6
(normal) Options: 0 to 20 in increments of 1
20 Feature Programming Unlocked Locked
21 Transmitter Program-
ming Unlocked Locked
22 Remote Start Runtime 12 min. Options: 1 to 60 min.
23 Virtual Tach Fine tune Not Ini-
tialized Options: Not initialized, 0 to 1000 in 50 millisecond
increments
Feature Menus
Default settings are in bold type. New features are bold with grey background.
Menu 1 - Security
Menu
Item
Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+
1 System Arming Mode Active Passive Arm
w/o lock Passive
Arm w/
lock Auto re-arm
w/o lock Auto
re-arm w/
lock
2 Panic Mode On Ign Off
only Off
3 Confirmation Chirps On w/Warn
chirps On On w/
Warn
chirps Off Off w/
Warn
chirps On Off w/
warn
chirps Off
4 Siren Duration 30 sec. 60 sec.
5 Ign-controlled Locks No Ign-
locking Lock &
Unlock Lock Only Unlock
Only
6 Door Lock Pulses Single Double
Unlock
Only Double
Lock Only Double
Lock &
Unlock
7 Door Lock Output
Duration 0.8 sec. 3.5 sec. 0.4 sec.
8 2nd Unlock 2nd unlock
on Ign-
control after
first unlock 2nd unlock
on Ign-
control with
first unlock
9 Comfort Closure No Comfort
Closure Comfort
Closure 1 Comfort
Closure 2
10 Horn Function Full Alarm
Only Siren Func-
tion 20 ms Siren Func-
tion 30 ms Siren
Function
40 ms Siren Func-
tion 50 ms
11 Hood Switch type Normally
Open
Normally
closed
12 Sensor Full trigger Single Double
13 Door Switch Type Normally
open Normally
closed
14 Trunk Switch Type Normally
open Normally
closed
15 Remote Button unlock
(Ign off) On Off
Menu 2 - Convenience
Menu
Item
Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+
1 One-time Bypass One time
bypass
Off One time
bypass On
2 Nuisance Prevention On Off
3 Override Pulse count 1 2 3 4 5
4 Door Trigger Error
Chirp On Off
5 Ign-controlled Dome
light On Off
6 OEM Alarm Disarm
w/Aux-Trunk On Off
7 OEM Alarm Disarm
Output With
Unlock Before
Unlock Remote
Start Only
8 OEM Alarm Disarm
Pulses 1 2
9 Aux 1 Output type Validity Latch Latch/
reset/ign 30 sec.
Timed Off (5)/2nd
unlock (6)
10 Aux 1 Linking No Linking Link to Arm Link to
Disarm Link to
Arm/
disarm Link to
Remote Start
only
11 Aux 2 Output Type Validity Latch Latch
reset/ign 30 sec.
Timed Off (5)/2nd
unlock (6)
12 Aux 2 Linking No Linking Link to Arm Link to
Disarm Link to
Arm/
Disarm Link to
Remote Start
only
13 Aux 3 Output Type Validity Latch Latch
reset/ign 30 sec.
Timed Off (5)/2nd
unlock (6)
14 Aux 3 Linking No Linking Link to Arm Link to
Disarm Link to
Arm/
Disarm Smart Key
Control (Link
to Remote
Start Off)
15 Aux 4 Output Type Validity Latch Latch
reset/ign 30 sec.
Timed Off (5)/2nd
Unlock (6)
16 Aux 4 Linking No linking Link to Arm Link to
Disarm Link to
Arm/
Disarm Link to
Remote Start
Only
17 Aux/Trunk Output type Validity Off 2nd unlock
Menu 3 - Remote start
Menu
Item
Feature Opt. 1 Opt. 2 Opt. 3 Opt.4 Opt. 5+
1 Transmission Mode Manual Automatic
2 Engine Checking Mode Virtual
Tach Voltage Off Tachom-
eter
3 Cranking Time 0.6 sec. 0.8 sec. 1.0 sec. 1.2 sec. 1.4 (5)/ 1.6
(6)/ 1.8 (7)
2.0 (8)/
4.0 (9)
4 Remote Start Runtime 12 min. 24 min. 60 min.
5 Activation Pulse Count 1 2
6 Turbo Mode No Turbo
Mode On-1 min. On-3 min. On-5 min. On- 10 min.
7 Timer Mode Runtime 12 min. 3 min. 6 min. 9 min.
8 Flex Relay Function Ignition 2 Acces-
sory 2 Starter 2
9 Diesel Start Delay Wait-to
Start input Timed 15
sec. Timed 30
sec. Timed 45
sec.
10 Accessory during Diesel
Start Delay On Off
11 Status 2 Output Status Latch Rear
Defogger Pulse Rear
Defogger
12 Parking Light Output Constant Pulsed Off
13 Anti-grind Output On Off
14 Tach Mode Starter
Release Normal Increase Decrease
15 Vehicle Temp
Auto Report Off On
16 Remote Start Safelock Off On
Remote Pairing
Prepare the vehicle system to be Paired with a new remote
1. Open a door.
2. Turn the key to the ON position.
3. Within 5 seconds press and release the Control button on the Control Center
one time.
4. Within 5 seconds, press and hold the Control button on the Control Center.
The status LED will flash one time and the siren then chirps to confirm the vehicle
is ready for remote pairing.
5. Release the Control button and proceed below.
Note: If no remote pairing results, the system will exit after 60 seconds.
Prepare the new remote to be Paired with the system
Remote Pair matches your LE remote to the system. Make sure the LE remote is set for
the desired Car 1 (Default) or Car 2 operation for the system it will be paired with.
1. Press and hold the
AUX
button for 8 seconds.
Note : The LOCK LED indicator will turn on at 3 seconds. Please disregard and
continue to hold .
2. Wait for the Transmit LED to light solid and the remote to beep. Release the
AUX
button.
3. Press the
AUX
for 1 second. The transmit LED will blink 3 times and beep 3
times.
4. Within 5 seconds, press the
AUX
button.
5. The vehicle siren will chirp and the LED indicators on the remote will light in
sequence with sound. You have now successfully learned the remote to the
vehicle remote start and security system.
6. Press the
AUX
button two times to exit learn routine on the remote. The transmit
LED will turn off and exit tone will sound..
Note:
Please see installation guide for pairing with the 1-way companion remote.
Basic Remote Functions
Button
Level
DIRECT
ACCESS
A U X
X 1
A U X
X 2
A U X
X 3
A U X
X 4
A U X
ARM SILENT ARM SENSOR BYPASS ARMED (SILENT
SENSOR)
ARMED (SILENT
TRIGGER)
A U X
DISARM SILENT DISARM VALET MODE CAR FINDER
A U X
REMOTE START RUNTIME RESET TIMER MODE SMART START REAR DEFOGGER
AUX
TRUNK RELEASE AUX 1 AUX 2 AUX 3 AUX 4
A U X
FUNCTION SHIFT CABIN TEMPERA-
TURE REQUEST
(2-WAY ONLY)
ARM STATUS
(2-WAY ONLY)
RUNTIME CHECK
(2-WAY ONLY)
LAST TRIGGER
REQUEST
(2-WAY ONLY)
Note: See Owner’s guide for more details
Table of Zones
A zone is represented by the number of status LED flashes used by the
system to identify a particular type of input.
Zone Description Input Description
1 Trunk Pin H1/7 Blue wire
2 Instant trigger: a heavier impact
detected by the onboard shock sensor On board shock sensor.
3 Door switch trigger H1/8 Green or H1/6 Violet wire
4 Instant trigger: For optional sensors Optional MUX port
5 Ignition trigger H3/1 Pink wire
6 Hood Pin H2/15 Grey wire