MUX2
| User Manual
© PyroScience GmbH
6
2
SAFETY GUIDELINES
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE STARTING TO WORK
WITH THIS DEVICE
•
Before connecting the device to the mains voltage, please ensure that the operating
voltage stated on the power supply corresponds to the mains voltage.
•
Ensure that the device is only operated under the climatic conditions specified in
the chapter "Technical Specifications" in this instruction manual.
•
Maintenance, modifications and repair work must only be carried out by a suitable,
qualified technician, trained by
PyroScience
.
•
If there is any reason to assume that the instrument can no longer be employed
without a risk (especially regarding any electrical parts), it must be set aside and
appropriately marked to prevent any further use.
•
The safety of the user may be endangered, e.g. if the instrument a) is visibly
damaged, b) no longer operates as specified, c) has been stored under adverse
conditions for a longer period.
•
If there is any problem, contact
PyroScience
and send the micromanipulator back
for repair.
•
The user has to ensure the following laws and guidelines:
o
EEC directives for protective labor legislation
o
National protective labor legislation
o
Safety regulations for accident prevention
•
This device is not protected against water spray
•
This device is not water-proof
•
This device must not be used under environmental conditions which cause water
condensation
•
This device must not be opened
