manualshive.com logo in svg

Pyronix Enforcer, Руководство по установке, Страница: 6 / 16

Поделиться
Скачать
Pyronix Enforcer Скачать руководство пользователя страница 6

Enforcer: Installation Manual 

Page: 6                                                                                

3.2

 

Inside of the  Enforcer: Rear 

1.

 Terminals for Earth and Mains Supply. 

 

2.

 If a modem is required (DIGI-PSTN, DIGI-

PSTN/VOICE, DIGI-GPRS, DIGI-LAN or DIGI-WI-

FI) then this space is used to install them. 

 

3.

 The transformer is situated in a housing. 

 

4.

 The rear tamper adjustment screw is used if 

the tamper from the front of the  Enforcer isn't 

sitting flush to the back plate - this may happen 
if the  Enforcer is installed on an uneven surface. 

 

5.

 If an I/O board is installed, then this space is 

used to install it. 

 

 

3.3

 

Inside of the  Enforcer: Front 

 

1.

 RS232 connection for Up/downloading to 

the InSite software. 

 

2.

 Where the control panel battery is located.  

 

3.

 The power connection for a communications 

module if connected. 

 

4.

 The connection for an I/O board if 

connected. 

 

5: 

The connection for a communication module 

to be installed. 

 

6: 

The power connection (+15V DC) for the  

Enforcer. 

 

 

 

 

 

 

 

 

 

Содержание Enforcer

















Отзывы:

Нет отзывов