Pyronix Enforcer, Руководство по установке, Страница: 4 / 16

Enforcer: Installation Manual
Page: 4
2. Specification and Warra nty
2.1 Technical Specification
Enforcer Mains Inputs
European rated voltage 230V AC -15/+10%
European rated current 83mA
Capable operating voltage 90 - 264V AC
Current 222mA - 75mA
Rated Frequency 50 / 60Hz
Input Fuse Rating T 2A (cannot replace)
PSU Type A
Radio Frequency 868MHz, FM Transceiver Narrow Band
Enforcer Battery
Output instant voltage 12.71V (with no mains and battery fully charged)
Peak to peak ripple voltage 10mVpk
Battery low voltage cut off value 8.5V
Type NiMH 8 cell 2200mAh rechargeable battery
CIE current when operating on battery backup 90mA
Environment
Physical Dims 220 x 160 x 50mm
Weight 1025g
Operating Temp
-10°C to +40°C
Nominal Temp -10°C to +50°C
Storage Temp -20°C to +60°C
I/O Board (If Connected)
Inputs 2 Wired (DEOL, SEOL)
Output Voltage 13.2 VDC (nominal)
Max Current for PGM Output 70mA
SAB Outputs 250mA Continuous Load
Bus Fuse F500mA 250V Bus Fuse
Aux Fuse F500mA 250V Aux Fuse
Systems Analysis: Inputs (Max 66)
On Board 32 Wireless
I/O Board 2 Wired
Input Modules 4 Wired (8 wired input each): EURO-ZEM8, EURO-ZEM8+ or
EURO-ZEM8+PSU
1 Wireless (32 wireless inputs): EURO-ZEM32-WE
Systems Analysis: Outputs (Max 40)
I/O Board 3 Wired
Keypads/Readers 3 Wired: EURO-LCDPZ, EUR-107
Input Module 16 Wired: EURO-ZEM8+
Output Module 1 Wired: EURO-OEM8R8T or EURO-PSU
1 Wireless: EURO-ZEM32-WE
2 x Fuses F500mA 250V
System Analysis: Additional Devices
Keypads Up to 3
Readers Up to 3
Bell Boxes 2
Wireless Arming Stations 4