User Manual
Page: 8
5.
Setting The System
5.1
Using a PIN Code or Tag
Enter a valid PIN code or present a valid
tag to the symbol as shown.
Enter the area you wish to set, and press
I
. ‘Please wait setting wireless’ will be
displayed.
There are three different setting
methods your installer will instruct you
through:
Final Door:
Leave the building and
make sure the exit door is closed
properly.
Timed:
Make sure you leave the building
before the timer shown on the keypad
expires.
Push to set:
Press the push to set
button installed by your engineer to set
the system.
5.2
Using the Wireless KEyfob (KF4-WE)
To set via a keyfob. Press
and hold for more
than 2 seconds.
The keyfob LED will start to flash
GREEN
indicating that the system is starting to set.
‘
Please wait setting wireless’
will be displayed
on the keypad and the programmed area will
begin to set.
To ‘
quick set’
, press and hold the
key a second
time for 4 seconds.
Once set, the keyfob LED will illuminate
RED
indicating that the system is now set.