EFORE YOU START 2
_____________________________________________________________
INITIAL INSPECTION
Before assembling the appliance, it is important to perform the following and determine if it is safe to proceed:
Carefully remove the fire table from the packaging
Check for the damage. If any damage is found contact the retailer you purchased the appliance from and report it
immediately.
Turn the fire table over with the help of another person. Do not attempt to turn over the table by yourself as injury to
yourself or damage to the table may occur.
Inspect the underside of the burner and components carefully for any signs of damage or loose connections. If any
damage is found, contact the retailer and report it immediately. Tighten any loose connections and perform a leak test
afterward.
Check the gas supply hose assembly for damage. The hose assembly must be replaced prior to the appliance being put
into use if any evidence of damage is found. The replacement hose assembly must be one specified by Pyromania Inc. in
the parts list located on page 15.
LEG INSTALLATION
B
Tank Seat
(Propane Only)
Only)
Fire Table
Lava rock
Legs
Cover
Check to make sure all parts are included. The parts
included are:
•
Fire table with gas supply hose preinstalled
•
4 aluminum legs (installation is optional) (Shangri-
La excluded)
•
50 pounds of lava rock
•
Weather resistant fabric cover
•
Propane tank seat
While the appliance is in the upside down position, install
the supplied legs by threading them onto the bases
located at the bottom of the appliance.
