pyrex SB-390 GOLD, Инструкция по эксплуатации

Страница: 26 / 36

PREHEATING THE ESPRESSO MACHINE
To make a cup of good hot Espresso or Cappuccino, we recommend that you preheat
the appliance before making coffee as well as the filter holder, filter and cup so that
the coffee flavor is not affected by the cold parts of the appliance.
1.
Remove the water tank (8) by pulling it upwards and filling it with water. Make sure the water
in the water tank is not less than «MIN» and does not exceed «MAX» indication.
• Use cold water. We recommend using filtered water as it reduces limescale and
prolongs the life of your coffee maker. Never use ware or frizzy water.
2. Place the water tank (8) in place until it snaps firmly into the base of the appliance.
3. Remove the handle/filter holder (14) by turning counterclockwise and place the filter (15) of
your choice (single / double dose, portion) without coffee.
4. Place the handle/filter holder (14) by turning clockwise. Ensure that the handle/filter holder
snaps firmly to the «lock» position.
5. Place a cup on the removable cup holder (5) and connect the plug into the socket. Make
sure that the steam control knob (6) is in the «OFF» position before plugging in the appliance.
6. Press the coffee On/Off button (1) to prepare the appliance. The indicator light will blink
until the appliance is warm and is ready.
7. When the indicator light (1) stops flashing, press the coffee button (2) to run water in the
cup.
8. Press the coffee button (2) again to stop running water. Preheating of the coffee maker has
been achieved.
9. When the warm-up process is complete, you can proceed to brewing coffee.
Note:
• There may be noise when the water is pumped the first time, it is normal, the
appliance releases the air to the device. After about 20 seconds, the noise will
disappear.