pyrex SB-380, Руководство пользователя

Страница: 36 / 40

BASIC PROBLEM SOLVING
Symptom Cause Solution
Water leakage from water tank
or from the lid of the water tank. The water tank is not located
properly. Make sure that the shaft of the
container is correctly aligned.
The water level in the tank
exceeds the MAX indication. The water level in the container
should be between MIN and
MAX indication
Water leakage from the base of
the coffee maker. There is much water in the drip
tray. Please clean the drip tray
The coffee maker malfunctions. Please contact an authorized
PYREX-BENRUBI service
center.
Water leaks out of outer side
of filter. There is some coffee powder
on filter edge. Clean filter edge.
Acid (vinegar) taste exists in
espresso coffee. The appliance has not
been cleaned properly after
descaling. Please allow some water to run
(without coffee) several times.
The coffee powder is stored for
a long time in a hot, wet place
and has been turned off. Use fresh coffee or store the
coffee in a cold and dry place.
After opening the coffee pack,
seal well and store it in the
refrigerator to keep it fresh.
The coffee maker does not
work. The plug of the appliance is not
properly plugged in. Plug the appliance into the
socket properly. If the problem
persists, contact one of the
authorized PYREX-BENRUBI
service centers.