Pyle Vintage PVTTBT9BK, Руководство пользователя

Страница: 7 / 9

TURNTABLE OPERATION
6
4. Open the TONE ARM CLIP to release the TONE ARM. Push the LIFT LEVER
backwards to raise the arm. Gently move the tone arm to the desired position over the
record. The turntable will begin to spin when the arm is moved toward the record.
Push the lift lever forward and lower the arm slowly onto the desired position on the
record to begin playing.
Please Note: The record will begin to spin as soon as the tone arm is moved over the record.
5. To select the volume level, turn the VOLUME CONTROL KNOB to adjust the volume.
PLEASE NOTE:
The TONE ARM will automatically stop at the end of the record and you must return the tone
arm to the arm-rest manually.
HOW TO REPLACE THE TURNTABLE NEEDLE
Removing the Stylus from the Cartridge
1. Place a screwdriver at the tip of the stylus and push downward as shown in direction
"
A
"
WARNING : when applying force to stylus, too much may damage or break the stylus.
2. Remove the stylus by pulling the stylus forward and pushing downward.
Installing the Stylus
1.
Hold the tip of the stylus and insert the stylus by pressing as shown in direction “B”.
2. Push the stylus upward as in direction "C" until the stylus locks into the tip position.
Guide Pins (Inside)