Installation your Monitor
Take care to select a suitable fitting location and securing method for
the monitor:
*The unit should not distract or obstruct the driver.
*The installation should not inhibit the entry to, or the exit from the
vehicle.
*The unit should not interfere with other vehicle components e,g
(sliding sunroof).
*Make sure the unit is installed to a secure, robust mounting location
and cannot become dislodged in the event of an emergency stop.
*Do not support the unit using only the vehicle interior roof lining.
*If driving is required, take care not to penetrate through the other
sheet metal of the vehicle.
*Avoid prolonged use of the monitor when the engine is not running
to prevent draining the vehicle battery.
*Place the mounting metal plate with the nuts facing upward, then,
mount the monitor by screws included
《
4
》
7-3 CH ERASE
CH ERASE CH1
↑↓
ADJUST
EXIT
:
SETUP OK:ENTER
It can to use CH+/CH- key makes the choice, and press
ENTER deletes the selected one. And the next channel will fill
a vacant position. This primitive channel will not exist to this
TV BOX In memory.
If wants to restore this primitive channel, then recreates
"AUTO FULL SCAN" will restore the channel.
《
19
》
