www.PyleUSA.com
8
To stop recording, just press the button again, will see indicator flash few
seconds then turns off, means the record is stop, now you can take off
your USB flash (or SD card).
Note:
please do not take the memory off when the indicator is flashing. The
recording will automatically stop if the USB flash or SD card out of memory.
After recording is stopped, connect the USB flash or SD card to
computer to see the recorded files: for 1080P recording, file will be
Encode_1080P_1, for 720 or 480p recording, file will be Encode_1.
Every record/stop operation will create a different recording file:
Encode_1080P_1, Encode_1080P_2, Encode_1080P_3… and so on.
The max size per file will be around 1.95GB (around 15 minutes for
1080p video), when you record a video more than 1.95GB (15 minutes),
PVRC52 will partition it in more than 1 file, for example: if you record a
45 minutes 1080p video by one click recording, you will see 3 files:
Encode_1080P_1, Encode_1080P_1_1, Encode_1080P_1_2…and so on
Sometimes you may find some recorded video with problems, like: skip.
This is due to using a USB flash on NTFS format, and you haven’t click
“safety remove” the device when disconnect from computer (especially
for USB HDD, if not safety remove, may caused serious problem). You
might need to format it to FAT32 if that problem keeps happening.
FIRMWARE AND OTHERS:
1. Update firmware: you maybe need update firmware for this device for
some reason. Copy the firmware file in to USB disk or SD card, power
off the device (unplug power jack), plug USB disk to device, power on,
the record indicator will flash 7~8 seconds, and become blue, it means
the update is finished.
2. After long time using, you will see the number of recording file
become too big, for example Encode_1080P_234, but you want it be
start from Encode_1080P_0, to do it you just keep pressing record
button (before power on), then plug the power jack to power on the
device, after 10 seconds, the file number will start from 0.