www.PyleUSA.com
7
WHEN IN USE THESE ARE LED LIGHT STATUS:
BLUE POWER LED –
lit when connected to power.
RED RECORD LED –
lit when recording in progress.
GREEN YPBPR LED –
lit when input source YPbPr is selected.
GREEN HDMI LED –
lit when input source HDMI is selected.
Two GREEN LED –
lit when input source CVBS is selected.
RECORD:
You should see the pass through video on the screen after connection is
ready (no matter composite, component, or HDMI). The blue indicator
will switch on. It means the device is ready to record.
To record video --- press the record button, then you will see the
RECORD indicator will switch on, this indicates recording in progress.
There are several reasons for no actions after you press record button,
you may need check:
1. The input video source disconnected.
2. The USB drive is out of memory.
3. The format for USB drive is not suitable, e.g. exFAT. PVRC52 support
FAT, FAT32, and NTFS.
4. The USB drive is not connected well.
5. The USB drive is not ready, normally, it will take 4~8 seconds after plug
it on.