background image

TABLE 1.WASH MODE AND WASH/RINSE TIME

 

1. Pull out the power cord and hang it on the hook on the side of the washing 

 

     machine.

 

2. Thoroughly drain out the water from the wash tub.

 

3. Turn the Wash Selector to Normal position.

 

4. Clean the washing machine and hang the drain hose to the hook on the side of 

 

     the machine.

  3. Use low foaming/high--density laundry powder or liquid 

 

     detergent for more 

 

    effective washing.

 

4. Use of warm (not hot or boiling) may improve washing effect.

 

5. Remove the water supply inlet hose and remove the water from it and place 

 

    hose nside the wash tub.

 

6. Let the machine air dry in a ventilated place before putting back the Lid Cover.

 

7. When the washing machine has been used for some time, some fabric naps 

 

    may accumulate underneath the pulsator. If this piles-up, it may affect the 

 

    normal running of the roll-stick. To check and clean this, take out the pulsator 

 

    by unscrewing it carefully. Clean the pulsator by subjecting it by running water 

 

    and brushing it lightly. Do not use steel brush. Clean the base of the wash tub 

 

    also for any fabric naps. Return the pulsator to its proper position. It is 

 

    suggested that you clean it once a month.

MAINTENANCE AFTER USE

 

LEVEL OF

SILK WOOL

COTTON, HANG

COTTON & HEMP

Soiled Mode

Chemical Light

Soiled

Cotton, Linen,

Normal

Seriously Soiled

Wash Time 

(Minutes)

2-5 Minutes

5-10 Minutes

10-15 Minutes

Содержание PUCWM11









Отзывы: