www.PyleUSA.com
12
www.PyleUSA.com
13
Steps:
1. Loosen the protector screw (using a screwdriver) as shown in figure 1.
2. Turning clockwise the adjustor screw to tighten the feeding hopper, shown in
figure 2.
3. Turning counter clockwise the adjustor screw to loosen the feeding hopper,
shown in figure 3.
4. After adjusting the correct level and counting performance is normal, tighten the
protector screw (using a screwdriver), shown in figure 4.
When adjusting the bill thickness adjustor screw does not
solve the problem of improper bill feeding, you may need
further help by.authorized service center.
Hand-hold a note. Put it inside the counting roller and
resistant rubber. (see the picture). To test the tensile force.
Clockwise direction is tighten, counter-clockwise direction is loosing.
10. Counting Roller Replacement
•
When the counting roller damaged, it will cause counting not fluently or correct.
•
Open the top cover, loosing the screw of roller axis machine.
•
Replaced old roller. Then fix the machine inside.
11. Maintenance
•
Do not operate the unit in areas with high temperature or high humidity since it
may damage the machine.
•
When not using the unit for a long period of time, remove the power plug from
the wall outlet.
•
Never operate the unit under strong light.
•
Clean the machine frequently after switching off and unplugging of the machine.
•
Do not use this product in areas where it may be exposed to water or other liquids.
•
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaner. Use a brush or a damp cloth for Tensile force test. cleaning.
System Features:
•
Accurate, Reliable & Hassle-Free & Bill Counting
•
Integrated Counterfeit Bank Note Detection
•
Built-in UV (Ultraviolet) Scanning for Bill Authenticity
•
Magnetic (MG), Magnetic Thread (MT), & Infrared (IR) Detection
•
Dual High-Precision Counting Sensors for Accurate Scanning
•
'Add' Function: Continuously Keeps Count of Bills Added
•
'Batch' Function: Process Bills in Designated Amounts
•
Automatic Half-Note & Chain-Note Detection Ability
•
(2) Counting Modes: Manual and Automatic
•
Top-Loading Bill Feeding Hopper
•
Digital LCD Display Readout
Technical Specs:
•
Counting Speed: Up to 1100 Bills/min
•
Hopper Bill Capacity: 300 Bills
•
Size of Countable Notes: 50mm×100mm/90mm×180 mm
•
Power: 110/220
Tensile force test
