www.PyleUSA.com
8
www.PyleUSA.com
9
Do not change other unmentioned settings, changing other setting may cause
improper working condition.
•
The bigger number means the higher sensitivity you set and “0” means deactivate
this detection function.
•
The UV and MG/MT detection can be used at the same time while counting to
multiply the chances of detecting a counterfeit bill. By default, the UV and MG/MT
detection functions are automatically turn on when the unit is powered up.
Those functions can also be selected or deselected by pressing “CF” buttons.
<IR (Infrared) Detection Function <available for the models with UV
detection or the model with both UV and MG/MT detection>
•
used to check all kinds of banknotes which with thickness.
•
By default, serving as a supplementary function, the IR detection can be activated
when the unit is powered up.
•
If the machine detects a double-note when counting, it will stop and emit
beeping sound, while the batch display will show the message “d3” (alerting the
user the of the presence of a double-note). The double-note will always be the
last one on the stacker. Remove the dubious bill, press “RESET” button to continue.
•
The sensitivity of IR detection can be adjusted. Hold “BATHC” button for 3 seconds,
the batch display will show the current sensitivity level “CXX” then press “+” “-”
buttons to choose the desired Sensitivity level (range from 0-10). After choosing
of the level, press “RESET” button to confirm.
<DD Detection function <available for the models with UV detection or the
model with both UV and MG/MT detection>.
•
Used to check a note with different width 8mm
•
By default, serving as a supplementary function, the detection can be activated
when the unit is powered up.
•
If the machine detects a note with different width 8mm when counting, it will
stop and emit beeping sound, judge from first note while the batch display will
show the message “d4” (alerting the user the of the presence of a note with
different width). The note will always be the last one on the stacker. Remove the
dubious bill, press “RESET” button to continue.
<Half-note Detection<available for the models with UV detection or the
model with both UV and MG/MT detection>
•
Used to check half-note.
•
By default, serving as a supplementary function, the half-note detection can be
activated when the unit is powered up.
•
If the machine detects a half-note when counting, it will stop and emit beeping
sound, while the batch display will show the message “d5” alerting the user the
presence of a half-note bill). The dubious bill will always be the last one on the
stacker. Remove the dubious bill, press “RESET” button to continue
<the counting display will clear>.
CAUTION:
1. It is highly recommended to contact the authorized service center or local dealer
before you do the above adjustments.
2. Improper adjustments may cause improper working condition or false detection
results.
7. Fake Money Alarm
When fake money pass the machine, the counting will stop and alarm.
The function display will show the error code. The last note on the stacker normally
is the fake money. The machine counting quantity number is not included in this
note. remove the fake money. Press “RESET” button, the machine will start
counting again.
*Fake money or questionable money
