3. Batch Function
•
The preset batch function can be performed by pressing the“
BATCH
” button
(the BATCH indicator will appear). By default, when pressing the “
BATCH
”
button, the batch function is turn on. The batch number can be set in amounts
between 1 and 999 by pressing No. ”
CF/+
“ and “
ADD/-
” button. To clear this
function, press the “
BATCH
” button until the indicator is off.
•
Under the batch counting mode, once the hopper is loaded, the machine will
start counting and stop when the counted quantity reaches the preset batch
one.
•
To repeat the batch counting operation under the same preset batch quantity,
just remove the counted bill from the stacker. The unit will batch the next
group of bills under the same settings.
•
If you wish to keep batching without removing the preset number, press the
“
RESET/AUTO
” button.
•
If the counted number does not equal with the preset batch number, the
counter display will show the quantity with blinking number.
•
When counting with MG and/or UV detection on, the machine will stop
automatically when detecting counterfeit currency. This function can be
resumed by removing the dubious bill from the stacker and pressing
“
RESET/AUTO
” button.
6. COUNTERFEIT DETECTION
UV (Ultraviolet) Detection Function
Available for the model with UV detection or the model with both UV and
MG/MT detections.
•
Used to check all kinds of banknotes which contains UV features.
•
The UV function is automatically turned on by default when the machine is
powered up. It can also be selected or deselected by pressing the ”
CF/+
“
button located in the function console.
•
If the machine detects a counterfeit note when counting, it will stop and emit
beeping sound, while the batch display will show the message “
d1
” and the
UV indicator will blink (alerting the user of the presence of a dubious bill). The
dubious bill will always be the last one on the stacker. Remove the dubious
bill, press
RESET/AUTO
button to continue.
•
The sensitivity of UV detection can be adjusted. Hold “
BATCH
” button for 3
seconds, the batch display will show the current sensitivity level “
AXX
”, then
keep pressing ”
CF/+
“ and “
ADD/-
” button to choose the desired sensitivity
level (range from 0-9).
After choosing the level, press “
RESET/AUTO
” button to confirm/save. Do not
change other unmentioned settings, changing other setting may cause
improper working condition.
•
The bigger number means the higher sensitivity you set and “
0
” means
deactivate this detection function.
MG (Magnetic)/MT (Magnetic thread) Detection Function
Available for the models with both UV and MG/MT detections
•
Used to check all kinds of banknotes which contains the magnetic features.
•
The
MG/MT
function is automatically turn on by default when the machine is
powered up. It can also be selected or deselected by pressing the “
CF/+
”
button located in the function console.
•
If the machine detects a counterfeit note when counting, it will stop and emit
beeping sound, while the batch display will show the message “
d2
” and the
MG/MT
indicator will blink (alerting the user the presence of a dubious bill).
The dubious bill will always be the last one on the stacker. Remove the
dubious bill, press “
RESET/AUTO
” button to continue.
•
The sensitivity of MG detection can be adjusted. Hold “
BATCH
” button for 3
seconds, until the batch display will show the current sensitivity level “
BXX
”,
press “
CF/+
” “
ADD/-
” button to choose the desired sensitivity level (range
from 0-9). After choosing the level, press “
RESET/AUTO
” button to confirm
save. Do not change other unmentioned settings, changing other setting
may cause improper working condition.
•
The bigger number means the higher sensitivity you set and “
0
” means
deactivate this detection function.
•
The
UV
and
MG/MT
detection can be used at the same time while counting
to multiply the chances of detecting a counterfeit bill. By default, the
UV
and
MG/MT
detection functions are automatically turn on when the unit is
powered up. Those functions can also be selected or deselected by pressing
“
CF/+
” buttons.
IR (Infrared) Detection Function
Available for the models with UV detection or the model with both UV and
MG/MT detection
•
Used to check all kinds of banknotes which with thichness problem.
•
By default, serving as a supplementary function, the IR detection can be
activated when the unit is powered up.
•
The sensitivity of IR detection can be adjusted. Hold “
BATCH
” button for 3
seconds, the batch display will show the current sensitivity level “
CXX
” then
www.PyleUSA.com
6
www.PyleUSA.com
7
