NOTE
Generally speaking, most of the above-mentioned problems may be caused
by dust or dirt inside of the machine. So keeping the machine clean is highly
recommended.
9. HOPPER ADJUSTMENT
When improper feeding of bills occur, adjust the feeding thickness setting in
the hopper by turning the adjustor screw located in the back of the machine
to ensure proper feeding.
Steps:
1. Loosen the protector screw (using a screwdriver) as shown in figure 1
2. Turning clockwise the adjustor screw to tighten the feeding hopper, shown in
figure 2.
3. Turning counter clockwise the adjustor screw to loosen the feeding hopper,
shown in figure 3.
4. After adjusting the correct level and counting performance is normal, tighten
the protector screw (using a screwdriver), shown in figure 4.
When adjusting the bill thickness adjustor screw does
not solve the problem of improper bill feeding, you may
need further help by authorized service center.
Hand-hold a note. Put it inside the counting roller and
resistant rubber. (see the picture). To test the tensile
force. Clockwise direction is tighten, counter-clockwise
direction is loosing.
10. COUNTING ROLLER REPLACEMENT
When the counting roller damaged, it will
cause counting not fluently or correct.
Open the top cover, loosing the screw of
roller axis machine. Replaced old roller.
Then fix the machine inside.
11. MAINTENANCE
•
Do not operate the unit in areas with high temperature or high humidity
since it may damage the machine.
•
When not using the unit for a long period of time, remove the power plug
from the wall outlet.
•
Never operate the unit under strong light.
•
Clean the machine frequently after switching off and unplugging of the
machine.
•
Do not use this product in areas where it may be exposed to water or other
liquids.
•
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaner. Use a brush or a damp cloth for cleaning.
12. SPECIAL FUNCTION
1. With chargeable battery (Optional)
13. SYSTEM FEATURES AND TECHNICAL SPECS
System Features:
•
Accurate, Reliable & Hassle-Free & Bill Counting
•
Integrated Counterfeit Bank Note Detection
•
Built-in UV (Ultraviolet) Scanning for Bill Authenticity
•
Magnetic (MG), Magnetic Thread (MT), & Infrared (IR) Detection
•
Dual High-Precision Counting Sensors for Accurate Scanning
•
'Add' Function: Continuously Keeps Count of Bills Added
•
'Batch' Function: Process Bills in Designated Amounts
•
Automatic Half-Note & Chain-Note Detection Ability
•
(2) Counting Modes: Manual and Automatic
•
Top-Loading Bill Feeding Hopper
•
Digital LCD Display Readout
Technical Specs:
•
Counting Speed: Up to 1050 Bills/min
•
Hopper Bill Capacity: 300 Bills
•
Size of Countable Notes: 50mm×100mm/90mm×180 mm
•
Power: 110/220V
www.PyleUSA.com
10
www.PyleUSA.com
11
Tensile force test
New roller
Old roller
