Pyle PRJ3D89, Руководство пользователя

Страница: 15 / 18

&DQQRWXVHUHPRWHFRQWUROIRURSHUDWLRQ
14
3URMHFWRUFDQQRWSURMHFWVKRZVLJQDO
z
Please verify that the image source is working.
z
Please check the cable between signal source and projector is
connected or not.
z
Verify the Input settings match signal of the input port.
%OXUU\ LPDJH
z
Adjust the focus if image is blurry.
z
The projection angle is too large or distance is too long.
z
Inspect lens for dust or debris.
4.
7KHLPDJHLVWRRELJRUWRRVPDOO
.
z
Verify source resolution.
Please keep setting of computer output signal and projector’s
consistent. We suggest that you set resolution and frequency to 640×480
and 60HZ.
3LFWXUH FRORU
z
Verify the correct connection of the source connection.
z
Adjust the brightness and contrast ratio.
z
Time to change lamp?
The image will become dark before you need to replace the blub.
z
Does it have batteries? Is polarity correct or not. Is power weak?
z
Do operate the remote control by correct orientation?
Range of operation degree: follow 30±10% degree of projector’s front.
z
Put the front of remote control to projector for operation?
z
Is the distance to projector too far?
Operation distance is 5.5±5% meters.
z
Is remote sensor affected by strong light from sunshine or fluorescent
lamp?
Remote sensor can be disabled by strong light.