6
4.
Basic Functions
4.1
Power on/off
Press the Power button (located in the middle of the right side) and it will enter the
normal display scene. In any display state, press and hold the Power button for 3
seconds, and the device will power down.
Normal display scene
Memory card recording time remaining
State mark. In the video preview state, it is film icon; in the video recording
state, it is a red dot; in the photo preview state, it is a camera icon.
The ID number of the device.
Displays that there is a memory card in the device.
Battery level icon.
Displays the system date and time.
Displays the remaining storage of the memory card.
4.2
Screensaver/Standby
1.
Screensaver: It automatically enters screensaver when there are no actions
performed for three minutes. If this occurs, the LCD will shut off.
2.
Standby: The device will enter standby mode (power-saving mode) when there
are no actions performed for 3 minutes. In standby mode, press any button to
activate the device. In standby mode, the electricity consumption will be reduced,
which extend the battery life. This device can be in standby mode for over 30
days without needing a recharge.