8
8.
Recorded video extension: press the up/down button to choose the recorded
video extension item, press the OK/Playback button, the item turns yellow,
press the Up/Maximize button or the Down/Minimize button to turn on/off
the state, then press the OK/Playback button to confirm the choice.
9.
ID settings: press the up/down button to choose the ID item, press the
OK/Playback button, the item turns yellow, press the Up/Maximize button or
the Down/Minimize button to choose ID, then press the OK/Playback button
to confirm the choice.
10.
Motion detection: press the up/down button to choose the motion detection
item, press the OK/Playback button, the item turns yellow, press the
Up/Maximize button or the Down/Minimize button to turn this function
on/off, then press the OK/Playback button to confirm the choice.
11.
After finishing the settings, press AUD/Back button to exit System settings.
Tip: For law enforcement software, those three settings need the device to
connect with the computer. Please refer to the software instructions in the
CD to set those settings.
4.4
Night vision lights and Filter switch on/off
If you use this device during the night, press the button to open the infrared
light; the filter is switched to white film, suitable for night use.
Press the “Up button” to switch between day and night operating mode.
Daytime work mode display image for color display, nighttime mode displays
image in a black and white display.
4.5
Photo
In the initial preview screen, press the "Photo/Menu" button to take pictures.
The upper left corner of the screen will display the camera icon while taking photos
and the camera icon will briefly turn red. The indicator light flashes red once, and is
accompanied by a “clicking” picture sound. Each press of this button will shoot a
photograph, named with the date and time and JPG suffix (stored in the memory card).
To view photos, please check the "View/Playback Video" section.
4.6
Video/Capture
1.
Video
：
In normal display mode, press the "Video" button to record. The upper
left corner of the video screen will display a red dot. The indicator will
slowly flash a red light. Press this button once to start recording; press it
once more to stop recording. The file name will be the date and time (MP4
suffix) and will be stored in the memory card. To view the video, see the