Pyle PLDNANDVR695, Руководство пользователя

Страница: 6 / 32

www.PyleUSA.com
FRONT PANEL AND BUTTONS
Tips:
Navi----You might have several maps in this device, by pressing Navi button, you will enter into the map
which you set as default in the Navi path, if you want to change the navi path to another map, please go to setting
to change it.
Setting Car setting Navi setting.
TURNING POWER ON
1. Turn on the engine key to the “ACC” or “ON” position
2. Press and hold the power button for 3 seconds
- When the engine key is turned to the off position the unit is turned off
Status Bar (Along top of radio screen and app screen) you can swipe down for more.
5
Home
Time display
Screen shot
Bluetooth
Location
DVR
Wi i signal
Function set
Return
3G
Display On/O ff
Buon & Feature Layout
Mic Microphone port
Power/Mute Hold to power up / shut down unit. Short press while unit is on to mute the volume output
Home Switch between apps/radio interface, Press while in GPS interface to return to radio apps
Navi
Press to load GPS software from SD map card
VOL- Volume down
VOL+
Volume up
˄
Position screen tilt upward
˅
/Eject Position screen tilt upward
Hold to open screen and eject disk.
RES
Use a pin to insert into reset port to trigger unit reset. (Hold for 20 secs . to reset)
IR
IR remote receiver port