+- 30 Degree
Appendix
Changing the New Battery in Remote Control
1. Push the battery case button to wards the right.
(As shown # 1 in below
figure)
2. Pull the battery case away from the remote control.
(
As shown
# 2
in below figure) Change a new battery.
Cassette Button
1
2 Battery
Using the Remote Control
1.Point the remote control towards the IR sensor in front of
the monitor housing.
2.Operation angle: IR remote control will work about 30
degree in each direction from the IR sensor of the monitor
housing.
4
* TV SECTION
<TV SETUP>
ANT SOURCE
TV SYSTEM
AUTO SEARCH
SEARCH
FINE TUNE
PROGRAM
SKIP
FREQ
<ANT SOURCE>
AIR
CABLE
<TV SYSTEM
>
NTSC
FM RADIO
SECAM-DK
PAL-I
PAL-BG
VOLUME
* Quick Adjustment OSD Menus
1. By pressing "MENU" button, you may open the MAIN MENU, using " " or " "
buttons to pick out OSD functions.
2. In order to select desire options, it is necessary to press "MENU" again to
enter each mode, than using " "/ " " to increase or decrease parameters as well.
3. Press " " or " " button directly to adjust speaker volume.
4. Press the " EXIT" mode to store your selected parameter and
leave the OSD Menus.
50
* OSD Menus in TV Source
7
