Ⅱ
. Battery Installation
1. Ensure power switch is in the off position.
2. Install 4AA batteries according to polarity indicated in the battery tray.
★
Recommended Alkaline battery
★
nickel-hydrogen battery rechargeable never to be used (low voltage of nickel-
hydrogen battery would render the camera non-working )
★
Incorrect voltage or polarity (+/-) will get the battery hot and or damage unit.
Ⅲ
. SD Card Installation
1. Make sure SD Card is not write-locked before inserting.
2. Insert SD memory card into the SD Card Slot completely and in the correct
direction as shown in below picture at the side of the housing, until “click”.
