PYLE PRO PT-910 Amplifier OwnerÕs Manual Ð 6
PYE PRO AMPLIFIERS
warranty registration card
Thank
you
for
purchasing
this
PYLE
product. To activate your
warranty, please mail this card
within 10 days.
Name
Address
City, State ZIP
Model No. Serial #
(if available)
Date of Purchase
Purchased at:
Music Products Store
Catalog Merchandiser
Sound Contractor/Installer
Mail Order
Other
PT-910 Specifications
Input Impedance
Continuous Output Power
Stereo at 1 kHz
Stereo at 1 kHz
Bridged at 20 Hz to 20 kHz
Bridged at 1 kHz
Peak Power
Total Harmonic Distortion
(at 70 Watts, 8 Ohms, 1 kHz, with Band Pass Filter)
MIC (Phone Jack)
MIC (XLR Jack)
CD/AUX
PHONO
Input Sensitivity
(at 0.5% THD, 1 kHz)
MIC (Phone Jack)
MIC (XLR Jack)
CD/AUX
PHONO
Signal to Noise Ratio (Input Shorted) with WTD
MIC (Phone Jack)
MIC (XLR Jack)
CD/AUX
PHONO
Frequency Response
(at 1 Watt, +/- 3dB)
MIC (Phone Jack)
MIC (XLR Jack)
CD/AUX
PHONO (RIAA 100 Hz/10 kHz)
Notch Filter Effect
Range
Depth
Noise Level (Input Short)
Speaker Impedance
Power Requirement
Power Fuse
Dimensions (HWD)
Weight
20K Ohms
120 Watts x 2 (8 ohms)
175 Watts x 2 (4 ohms)
250 Watts (8 ohms)
350 Watts (8 ohms)
1200 Watts (8 ohms)
0.20%
0.20%
0.15%
0.20%
1.5mV
1.5mV
500mV
3mV
65dB
65dB
75dB
70dB
40 Hz-20 kHz
40 Hz-20 kHz
20 Hz-30 kHz
+13dB/-13.5dB
300 Hz-3kHz
-12dB
0.75mV
A,B (4-16 ohms)
A+B (8-16 ohms)
Bridge(8-16 ohms)
120V AC 60Hz
7 Amps/250 volt
136 x 482 x 367 mm
(5 3/8 x 19 x 14 7/16 inches)
27 lbs (12.3kgs)
All PYLE PRO products are carefully constructed and tested before
shipment. Units purchased in the USA are warranted to be free of
defects in material and workmanship for one (1) year from the date of
purchase. This warranty is limited to the original retail purchaser of
the amplifier.
Should the unit fail due to factory defects in material or workmanship,
your unit will be repaired or replaced at the sole discretion of PYLE.
To obtain warranty service, you must first call our Consumer Return
Hotline at (718) 236-6948 to obtain a Return Authorization Number.
This R.A. # must appear on the outside of your package and on all
paperwork relating to your return.
When returning the unit to us for warranty service, it must be carefully
packed and shipped, prepaid, to:
R.A.#: _____________
PYLE PRO Service Center
1600 63rd Street
Brooklyn, NY 11204
You must also include the following items with your return:
¥ A copy of your sales receipt or other proof of purchase
¥ A brief letter, indicating the problem you are experiencing
with the product
¥ Include in your letter your return address, daytime phone
number and R.A. number
¥ Also include a check or money order for $20.00 for return
shipping, handling and insurance, or provide your Visa/MC
number with expiration date.
Our obligation under this warranty is limited to the repair or replacement
of the defective unit when it is returned to us prepaid. This warranty
will be considered void if the unit was tampered with, improperly
serviced or subject to misuse, neglect or accidental damage.
Limited Warranty
NOTE:
¥ Specifications are typical; individual units might vary.
¥ Specifications are subject to change and improvement without
notice.
¥ Actual product may vary from the product images in this document.
