PYLE Audio PSBV800, Руководство пользователя

Страница: 4 / 14

STANDBY MUTE INPUT VOL - VOL +
Screw
Base
Aluminum Pipe
2.PLACE THE UNIT ON THE TABLE
1. Put the main unit upside down on a horizontal surface with soft cloth.
2. Insert the two aluminum pipes into the hole on the base of the unit. And then put base on the pipe.
3. Insert screws inside base hole and the pipe. Lock the screws.
To place the unit on the table, please install the stand as below.
SRS
Take advantage of SRS stereo technology, you can listen to surround sound without extra speakers.
Placing our system as follows, and turn on SRS effect by press the SRS Button on the remote control,
you will get the surround sound effects.
is a trademark of SRS Labs, Inc. SRS technology
is incorporated under license from SRS Labs, Inc.
SYSTEM INSTALLATION
1. PLACE THE UNIT
5 6
STANDBY MUTE INPUT VOL - VOL +
44mm
800mm
44mm
800mm
Figure 1
Figure 2
Figure 3
Figure 4
1) Choose the position where you want to mount the sound bar. Mark as Figure 1 indicates.
2) Use a drill(7mm drill bit) to make holes according to the marks in figure 1.
3) Put the plastic anchors into the holes and screw the wall plate onto the wall.(NOTE: Verify the
fixing of wall plate in a proper way).
4) Aim the sound bar mount toward the wall plate to hang the sound bar on the wall.
(NOTE: Verify the mounting of sound bar to avoid an accident)
3. MOUNT THE UNIT ON THE WALL
If you want to mount the unit on the wall, please do not install stand.
Mount the unit on the wall as below.